Fortress-Power Monitoring Set-Up Guide

Fortress-Power Monitoring Set-Up Guide

1. Download the Envy Fortress Power APP Located both in Apple App Store and Google Play Store on a mobile device.

How to set up the Envy Inverter Wi-Fi Dongle: Watch the YouTube Video

2. Plug the Dongle to the inverter while inverter is energized.

3. Connect to the Dongles Wi-Fi Network usually named BA********
4. Access the Envy App and Press the WIFI Module Connect.
5. Proceed to integrate the Dongle to the Home Wi-Fi by inputting the router’s SSID and Password. Server must be Set to North America. After clicking on Set, Click HomeWifi Connect. The Dongle will display 3 solid LED’s if the connection is successful. This may take 1 minute after selecting Home WIFI Connect.



If your cellphone does locate the customer’s Router as shown on the 5th step image, then proceed to access the web browser on your cellphone or laptop while being connected to the dongle’s Wi-Fi signal as seen in the 3rd step image. Type 10.10.10.1>User: admin, Password: admin. Select English on the top right side. Next, Select Station Mode Setting and input the internet router’s SSID and Password. Save and confirm that the Dongle has been integrated successfully by displaying 3 solid LEDs after 1 minute. Warning. You must not access nor change any other values in this web portal. Doing so, may break the Dongle and make it inoperable.

6. Select Register Tab
7. Complete End User Registration. Create End User username, password and make sure to select correct Continent, Region, Country, Time zone and physical Address. The Customer (Installer) Code shall be provided by Fortress Power to the Installer in which every installation done with this code will be reflected on the installer’s portal. The serial number and pin of the dongle is located on the side of the dongle and the packaging box.
8. Once Registered, the user can access the End User Portal where they can view direction of power flow, Solar, Battery, Export, and Consumption Data.


    • Related Articles

    • Installing Consumption CTs for Consumption monitoring

      Consumption monitoring is an optional feature of the Enphase system that measures the energy usage in your home. It measures the use of electricity in your home. It is a measurement of how much and when you are using electricity and is does not ...

    • Goodwe inverter Wifi connection guide

      Required before initiating the sequence Physical access to your Goodwe inverter. A Wi-Fi-enabled device such as a smartphone or tablet. Patience, the average reconnection time is 10mins. Step 1: Activate WiFi Access Point 1. Open your Goodwe SEMS ...

    • Sol-Ark Inverter Monitoring

      The following are the Sol-Ark inverter installation instructions. If you want to access your solar system online, you first need to create a Sol-Ark account, and here is a video tutorial on how to do it. With an account in place, you get the inverter ...

    • How do I use the Enphase app to monitor my solar production?

      The Enphase app is a powerful tool that allows users to monitor and manage their energy production and usage. With four main pages - status, energy, array, and menu - users can get an overview of their energy usage, view trends and savings, and ...

    • How do I transfer my Enlighten site to Go Green Solar?

      If you have already created a monitoring account with Enlighten and want to transfer admin rights to Go Green Solar, follow these steps: Log into Enlighten with your account (app or browser). Click on this link - ...